INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
PART NUMBER
WCAB
Cold Applied Cable Accessories

Cold Applied Insulation Boot

WCAB

Cold Applied Insulation Boot

Woer elastomeric insulating boots are molded parts which fit over the connection between the cable lug and the inline or right-angled bushing to improve phase-to-phase and phase-to-ground insulation. They are used in switchgears and transformers where the clearances are insufficient for normal operation, or to protect against flashover rodents or high humidity.

Maximum System Voltage

17.5kV

Basic Impulse Level

95kV

Collar Size

27mm

Bushing Diameter

31-45mm

Bushing Types

250A/630A

Cable Cross Section35-400mm2


Specification Table

Features

   Made of silicone rubber.

   Collar is optional for use where the bushing size is smaller.

   Offering tailor-made solutions against specific requirements(size, color).

   Connection can be energized immediately after installation.

   Excellent tracking and erosion resistance.

   Removable and re-installable.

   Fast and simple installation.

   Unlimited shelf life .

WCAB.jpg​


Notice: INERGEK reserves the right to make modifications deemed appropriate.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957
INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
PART NUMBER
WCAB
Notice: INERGEK reserves the right to make modifications deemed appropriate.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957