INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
PART NUMBER
SBRS-(4X)GRB
Dual Wall Products

4:1 shrink ratio Semi-rigid, High Viscosity ,Black Adhesive, Dual Wall Heat Shrink Polyolefin Tubing

SBRS-(4X)GRB

Semi-rigid, High Viscosity ,Black Adhesive, Dual Wall Heat Shrink Polyolefin Tubing

It consists of a double layer of cross-linked polyolefin and polyamide PA. The product has high shrinkage and wear resistance characteristics, and is widely used in electronic equipment wiring connections, automotive harnesses, home appliance harnesses, wire and cable branches, metal pipelines, wire and cable repairs, and other occasions that require sealing.

It consists of a double layer of cross-linked polyolefin and polyamide PA. The product has high shrinkage and wear resistance characteristics, and is widely used in electronic equipment wiring connections, automotive harnesses, home appliance harnesses, wire and cable   branches, metal pipelines, wire and cable repairs, and other occasions that require sealing.

07   SBRS-(4X)G.png


Features

● 4:1 shrink ratio allows for fewer sizes to cover numerous splice configurations and diameters.

● Thick adhesive liner forms an effective barrier against fluids and moisture penetration.

● Minimum shrink temperature: 70°C .

● Continuous operating temperature: -45°C to 125°C .

● Minimum Full Shrink Temperature:125℃.

● Standard color: The jacket is black , clear (other colors can be customized) and the 

   adhesive is black.


Technical Data

PropertyTest MethodStandard
Tensile Strength(MPa)ASTM D2671≥13.8
Elongation(%)ASTM D2671≥300
Tensile Strength after aging (MPa)ASTM D2671(158℃×168h)​≥9.7
Elongation after aging(%)ASTM D2671(158℃×168h)≥200
Dieletric strength(kV/mm)IEC 60243≥15
Volume resistivity(Ω.cm)ASTM D876≥1X1014
* Calculate based on wall thickness of jacket only.

Adhesive

PropertyTest MethodStandard
Water AbsorptionASTM D570<0.2%
Sofening Point (℃) ASTM E28100±5
Strength of peeling(PE) ASTM D 1000120N/25mm
Strength of peeling(AL)ASTM D 100080N/25mm


Specification Table

Dimensions

SizeExpandedAfter Recovery
mm

Inner Diameter

Min(mm)

Inner Diameter

Max(mm)

Total Wall 

Thickness(mm)

Adhesive 

Thickness(mm)

Φ4.00

4.00

1.00

1.40±0.30

0.70±0.20

Φ5.75

5.80

1.27

1.70±0.30

0.80±0.20

Φ7.407.401.652.00±0.300.95±0.20
Φ10.8010.802.412.45±0.401.20±0.20
​Φ12.00

12.00

2.41

2.45±0.40

1.20±0.20

Φ14.00

14.00

3.50

2.50±0.40

1.20±0.30

Φ16.0016.004.002.60±0.401.35±0.30
Φ17.7817.784.202.60±0.401.35±0.30

*Wall thickness will be less if tubing recovery is restricted during shrinkage.

Notice: INERGEK reserves the right to make modifications deemed appropriate.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957
INERGEK
INDUSTRIAL ENGINEERING & CONNECTIVITY
PART NUMBER
SBRS-(4X)GRB
Notice: INERGEK reserves the right to make modifications deemed appropriate.
🌐 www.inergek.com    ✉ [email protected]    ☎ +86 189 7105 6957