Thin wall Viton fluoroelastomer heat shrink tubing suitable for use in electronic systems and components in automotive, military/ aerospace and industrial applications requiring outstanding heat and fluid resistance.
Thin wall Viton fluoroelastomer heat shrink tubing suitable for use in electronic systems and components in automotive, military/ aerospace and industrial applications requiring outstanding heat and fluid resistance.

Features
● 2:1 shrink ratio
● High withstand to corrosive fluids in extreme temperatures
● Flame retardant
● Very flexible
● Easy to stamped
● Continuous operating temperature:-55℃-200℃
● Fully shrink temperature:175℃
● Meets MIL-DTL-23053/13
Technical Data
| Property | Test Method | Standard | Typical Performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥8.5 | 10. |
| Elongation(%) | ASTM D2671 | ≥250 | 300 |
| Tensile Strength after aging (MPa) | Ul224 158℃X168hr | ≥7.3 | 8.5 |
| Elongation after aging(%) | Ul224 158℃X168hr | ≥200 | 250 |
| Dieletric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω.cm) | IEC 60093 | ≥1X109 | 2.5X109 |
| Flammability | Ul224 VW-1 | Pass | Pass |
Dimensions
| Size | Expanded | Recovered | Standard Package M/Spool | Round/Flat | ||
| Inch | mm | Inner Diameter (mm) | Inner Diameter (mm) | Wall Thickness (mm) | ||
3/32 | 2.4 | 2.4 | 1.2 | 0.70±0.20 | 200 | Round |
| 1/8 | 3.2 | 3.2 | 1.6 | 0.75±0.20 | 200 | Round |
| 3/16 | 4.8 | 4.8 | 2.4 | 0.89±0.20 | 100 | Round |
| 1/4 | 6.4 | 6.4 | 3.2 | 0.89±0.20 | 100 | Round |
| 3/8 | 9.5 | 9.5 | 4.8 | 0.89±0.20 | 20 | Flat |
| 1/2 | 12.7 | 12.7 | 6.4 | 0.89±0.20 | 25 | Flat |
| 3/4 | 19.0 | 19.0 | 9.5 | 1.07±0.30 | 25 | Flat |
| 2 | 25.4 | 25.4 | 12.7 | 1.25±0.30 | 25 | Flat |
| 1-1/ 2 | 38.1 | 38.1 | 19.0 | 1.40±0.30 | 25 | Flat |
| 2 | 50.8 | 51.0 | 25.4 | 1.65±0.30 | 15 | Flat |
Note: 3:1 shrink ratio is available upon request