The RF coaxial surge protector, also commonly referred to as an RF lightning arrester, serves as an indispensable protective part for steady operation within contemporary communication systems.It is installed in series along the signal path between antennas and receiving devices like base stations and satellite receivers. Engineered professionally, this device is built to release transient overvoltage and surge current generated by lightning surges or grid instability on transmission lines.It rapidly conducts dangerous surge energy to the ground in nanoseconds, delivering reliable safeguarding for high-value, precision-sensitive electronic devices at the backend and preventing irreversible equipment damage.By reducing unexpected network outages and economic losses resulting from lightning impacts, this series becomes a must-have solution for constructing high-stability outdoor communication network infrastructure.
A full selection of connector styles and port combinations is available to meet diverse on-site installation demands:
Interface Specifications: N-Type, TNC, SMA, BNC, UHF, DIN 7/16.
Structural Configurations: Male to Female, Male to Male, Female to Female, along with bulkhead mounting models for stable cabinet and panel installation.
Impedance Options: 50Ω and 75Ω two mainstream specifications, fully compatible with various communication system impedance standards.
| Parameter | Material | Plating |
|---|---|---|
| Body | Brass | Ternary Alloy Plating |
| Insulator | PTFE | N/A |
| Contact Pin | Phosphor Bronze | Gold Plating |
| Coupling Nut | Brass | Nickel Plating |
| Parameter | Connector 1 | Connector 2 |
|---|---|---|
| Type | BNC | BNC |
| Standard | IEC 61169-8 | IEC 61169-8 |
| Impedance (Ohm) | 50 Ohm |
| DWV (at sea level) | 2500V |
| Working Voltage (at sea level) | 1000V |
| Frequency range(GHz) | DC-3GHz |
| VSWR | <1.20 |
| Rated DC voltage | 230V |
| Ground wire diameter | ≤8 mm2 |
| Maximum impluse discharge current | 20kA |
| Parameter | BNC |
|---|---|
| Recommended Coupling Nut Torque | Bayonet |
| Coupling Proof Torque | N/A |
| Coupling Nut Retention Force | ≥ 101 lbs |
| Contact Captivation-axial | ≥ 6.0 lbs |
| Durability (mating) | ≥ 500 |
| Temperature Range | -40°C to +125°C |
| Thermal Shock | MIL-STD-202, Method 107, Condition B |
| Moisture Resistance | MIL-STD-202, Method 106 |
| Corrosion | MIL-STD-202, Method 101, Condition B |
| RoHS | Compliant |